Fasel Elektronik FCU2000 Series, Руководство по эксплуатации

Страница: 37 / 56

"Basic settings" menu
Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09 37
10. Press the key. The selected line is enabled.
11. Option "light ON after heat-up phase" is enabled. Cursor flashes on the selected
line.
Press the key. Check mark is set (option selected).
Press the key: Check mark is deleted (option not selected).
12. Press the key. The selection is saved.
13. Exit the menu using the key or select the next line with the or key.
14. Press the key. The selected line is enabled.
15. Adjust the time for turn off delay. Digit flashes.
Press the key: Reduce value.
Press the key: Increase value.
Press the key: Select left digit.
Press the key: Select right digit.
16. Press the key. Selected value is accepted.
17. Exit the menu using the key or select the next line with the or key.
18. Option "light OFF at drying" is enabled. Cursor flashes on the selected line.
Press the key. Check mark is set (option selected).
Press the key: Check mark is deleted (option not selected).
19. Press the key. The selected line is enabled.
20. Exit the menu using the key.
6.1.8 Fan settings (only for menu "Pro")
In this menu you can set the following:
The mode in which the fan is turned on.
Follow-up time of the fan, if the mode is completed.
1. Press (basic settings) key. The lamp next to the key must light up.
2. Press the key until you see the following view:









Fig. 27: "Fan settings" view (example)
3. Press the key.
4. Following view is displayed: