Fasel Elektronik FCU2000 Series, Руководство по эксплуатации

Страница: 36 / 56

"Basic settings" menu
36 Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09
6.1.7 Light settings (only for menu "Pro")
In this menu you can set the time, when the light should go on and how long it should
stay on after the end of a mode.
1. Press (basic settings) key. The lamp next to the key must light up.
2. Press the key until you see the following view:










Fig. 25: “Light settings" view (example)
3. Press the key.
4. Following view is displayed:
  










Fig. 26: "Light settings – change mode" view (example)
5. Select one of the following lines with the or key:
– Light ON at start

(
→
point 7)
– Light ON if bath ready

(
→
point 11)
– Falling delay time x min

(
→
point 15)
– Light OFF at drying

(
→
point 18)
Note!
Only the option "light ON at start" or "light ON if bath ready" can be selected.
6. Press the key. Selected line is enabled.
7. Option "light ON upon starting" is enabled. Cursor flashes on the selected line.
Press the key. Check mark is set (option selected).
Press the key: Check mark is deleted (option not selected).
8. Press the key. The selection is saved.
9. Exit the menu using the key or select the next line with the or key.