Fasel Elektronik FCU2000 Series, Руководство по эксплуатации

Страница: 26 / 56

Operation
26 Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09
Fig. 10: View "RGB-LED brightness"
2. Press key.
3. Select RGB-LED brightness. Digit flashes.
Press the key: Increase value.
Press the key: Reduce value.
There are 4 brightness levels possible.
4. Press the key. The selection is saved.
5.8.2 Colour light mode (including parameter description)
NOTE!
The "Colour light mode" menu is only available for control devices with
the extension board type FCU-EXT-COLOR LIGHT or a RGB-LED con-
trol from the company Licht2000.
In this menu, you can adjust the coloured lights. The following table shows the parame-
ters and their explanations.
Parameter Description
OFF / ON
OFF: The colour light mode is off.
ON: The colour light mode is on. The colour lights are
controlled either directly (manual) or by an automatic
program (auto).
Manual / Auto The option "ON" must be selected.
Manual: The colour lights are manually controlled us-
ing this "Colour light mode". See parameters “1 / 2 / 3
/ 4".
Auto: The colour lights are controlled automatically.
Select the desired colour program using the parame-
ter "colour program”. For the "Auto" option, you can
make further adjustments in the "Colour light auto-
matic" menu.
Colour program The options "ON" and "auto" must be selected. 2 colour
programs are available. These programs can be setup in
the menu. "basic settings"
Lamps
1 / 2 / 3 / 4 The options "ON" and "manual" must be selected.
Depending on the settings in the service menu, you can
select single or mixed colours.
Single colours are: 1 / 2 / 3 or 4.
Mixed colours are combinations of two colour lights. The
following combinations are possible: 1 + 2 / 2 + 3 or 3 +
4.
Table: 8 Parameter description menu "mode colour light"
1. Select "colour light mode".
2. Following view is displayed: