Fasel Elektronik FCU2000 Series, Руководство по эксплуатации

Страница: 29 / 56

Operation
Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09 29
Option Description
FCU4x00 FCU2x00/FCU3x00
If power on

Start, as soon as control device is
switched on.
On heat-up phase

Start, as soon as a mode is active.
If bath is ready

Start, as soon as the set point
temperature is reached.
Table 9: Parameter description menu "colour light"
1. Select "colour light start".
2. Following view is displayed:








Fig. 13: View "colour light start"
3. Press key or -key.
4. Following view is displayed:










Fig. 14: View "Set colour light start – change mode" (example)
5. Select one of the following lines with the or key:
– If power ON

– On heat-up phase

– If bath his ready

6. Press the key. Selected line is enabled. The selection is saved. Check mark be-
hind the cursor is placed.
7. Exit the menu using the key. The view "colour light start" (Fig. 13) is displayed.