Fasel Elektronik FCU2000 Series, Руководство по эксплуатации

Страница: 23 / 56

Operation
Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09 23
The timer may be enabled or disabled depending on the setting. In the series
FCU2x00 and FCU3x00, weekly timer is not available.
1. The "Sauna" (Fig. 4), "Sauna with humidity" (Fig. 5) or "Infrared" (Fig. 6) view is
displayed.
2. Press the key till the symbol (adjust temperature) lights up.
3. Press the key.
4. Following view is displayed:











Fig. 7: "Change values" view (example)
5. Press the key. Last digit flashes.
6. Adjust the desired value:
Press the key: Reduce value.
Press the key: Increase value.
Note!
After the digit "9" or "0", the higher digit of the temperature value is changed. That
is "90" is displayed after "89".
You can also select the higher digit using the key or key and then change.
7. Press the key. The adjusted value is accepted
5.4.1 Maximum allowed heating time
After starting a mode, the remaining heating time is displayed in place of the full heating
time. The heating time can be changed only in standby mode.
The EN 60335-2-53 "Specific requirements for sauna heating devices" allows the follow-
ing maximum heating times:
Max. heating time Description
more than 12 hours Public cabins which are supervised by trained
personnel.
max. 12 hours Hotels, apartment blocks, etc.
max. 6 hours All other cabins / private households
Table: 7 Maximum heating time
The control devices are delivered with a maximum adjustable heating time of 6 hours. If
you need heating times exceeding 6 hours, please contact the installer or the dealer of
your sauna system.