Fasel Elektronik FCU2000-IR series, Руководство по эксплуатации

Страница: 29 / 44

„Basic settings“ menu
B_FCUxxxx-IR / Version V 1.07 Operating manual Series FCU2000/3000/4000-IR 29
12. Press the key. The selection is saved.
13. Exit the menu using the key or select the next line with the or key.
14. Press the key. The selected line is enabled.
15. Adjust the time for turn off delay. Digit flashes.
Press the key: Reduce value.
Press the key: Increase value.
Press the key: Select left digit.
Press the key: Select right digit.
16. Press the key. Selected value is accepted.
17. Exit the menu using the key or select the next line with the or key.
18. Option "light OFF at drying" is enabled. Cursor flashes on the selected line.
Press the key. Check mark is set (option selected).
Press the key: Check mark is deleted (option not selected).
19. Press the key. The selected line is enabled.
20. Exit the menu using the key.
7.2 „Basic settings“ for Options
NOTE!
This menu appears only, if the corresponding options board is installed
in the control device.
7.2.1 Colour light automatic
In this menu you can adjust the program sequence, if you selected the option „Auto“ in
the menu „colour light mode“.
→
See manual for program settings.
1. Press key (basic settings). The lamp next to the key must light
7.2.2 RGB-LED settings (only for FCU4xxx and menu "Pro")
HINWEIS!
The "RGB-LED settings" menu is only available for control devices
which are connected to a RGB-LED control from the company
Licht2000.
In this menu you can program the fading time (the time for a smooth colour transition
from one colour to another) for RGB-LEDs.
1. Press key (basic settings). The lamp next to the key must light.
2. - Press the key until you see the following view: