Fasel Elektronik FCU2000-IR series, Руководство по эксплуатации

Страница: 24 / 44

“General settings” menu
24 Operating manual Series FCU2000/3000/4000-IR B_FCUxxxx-IR / Version V 1.07









Fig. 6: View "colour light start"
3. Press key or -key.
4. Following view is displayed:










Fig. 7: View "Set colour light start – change mode" (example)
5. Select one of the following lines with the or key:
– If power ON

– On heat-up phase

– If bath his ready

6. Press the key. Selected line is enabled. The selection is saved. Check mark be-
hind the cursor is placed.
7. Exit the menu using the key. The view "colour light start" (Fig. 6) is displayed.
NOTE!
If the key is not operated for a few seconds, the program automatically
goes back to the "main" view. (If the controller has a timer and it is ac-
tive, he jumps into the timer menu.)