Fasel Elektronik FCU2000-IR series, Руководство по эксплуатации

Страница: 26 / 44

„Basic settings“ menu
26 Operating manual Series FCU2000/3000/4000-IR B_FCUxxxx-IR / Version V 1.07
9. Exit the menu by using the -key or select the next line with the or -key.
10. Select desired weekday. Check mark flashes.
Press -key: move cursor left.
Press -key: move cursor right.
11. Press -key. Selection is saved.
12. Leave menu with -key.
7.1.2 Select program (only for FCU4xxx)
Note!
For each mode there exist 8 programs which are freely adjustable. .
The program numbers are shown on the display. (These 8 freely ad-
justable programs may be locked by the service engineer.)
In this menu you can select 1 of 8 programs.
1. Press key “basic settings”. The lamp next to the key must light.
2. Press -key until the following view is shown:







Not available with FCU2000 and
FCU3000
Abb. 10: View "select program" (example)
3. Press -key
4. Select desired program with the keys or.
5. Confirm with key
7.1.3 Adjust display lighting (not for FCU2xxx)
In this menu you adjust the brightness of the display.
1. Press (basic settings) key. The lamp next to the key must light up.
2. Press the key until you see the following view: