III. ENGINE REPAIR
16
1. Drain lubrication oil
Place suitable container under the drain
hole. Remove oval flange of oil drain,
remove oilfilter. Wait until oil has fully
trained, if necessary, tip over engine.
(Figures 1 and 1a)
2.Air cleaner
Remove the two aircleaner selflocking nuts.
Pull off the air cleaner and discard gasked.
3. Muffler
Unscrew the two M8 hex nuts of the muffler
and the M6 hex nut of the muffler screen.
Pull of the screen, muffler and discard
gasket.
(Figure 2)
4. Fuel tank
Place clamp, close to the injector pump on
the fuel supply line coming from the tank.
Next, remove the banjo bolts and their
copper washers from the fuel injector and
the fuel injection pump. Close ports of
injector and pump again with banjo bolts to
preventdirt from entering. Next,remove the
locknut holding the fuel supply line clamp.
Finally, loosen the fuel tank straps and slide
them off the ends of the tank. The fuel tank
and the line may now be removed.
(Figure 3)
Содержание 15D Series
