background image

En 

 FARO Laser Scanner Photon – User’s Manual           

 

16 / 87

 

 

Fig.12 Insert 90° bend connector into scanner 

 

Attach the blue data and power cable to one of the legs of the tripod. 

 

Fig.13 Blue data and power cable at tripod leg 

Without battery 

 

Ensure that the connector box is switched off (red button pressed).  

 

When positioning the scanner, please ensure that the connector box is 
easily accessible and that its red power on/off button is easy to apply. 

 

Insert the bigger connector of the blue data and power cable into the 
connector box. 

 

Insert Ethernet cable into PC port as specified by PC manufacturer and 
into the connector box. If the Ethernet connection does not work, an 
Ethernet switch and two ordinary Ethernet cables might have to be put 
between PC and connector box. 

 

Check that the power supply unit is switched off and unplugged. 
Connect power supply cable to the connector box; connect power 
cable into an approved power supply source. 

 

With battery 

 

Ensure that the Battery is switched off. 

 

Insert the connector of the blue data and power cable into the battery. 

 

Insert Ethernet cable into PC port as specified by PC manufacturer and 
into the battery. If the Ethernet connection does not work, an Ethernet 
switch and two ordinary Ethernet cables might have to be put between 
PC and battery. 

Содержание Photon 20
























































































Отзывы: