manualshive.com logo in svg

Faro Gage, Руководство пользователя

Поделиться
Скачать
Faro Gage Скачать руководство пользователя страница 80

A-2

 

WILL THE LICENSER BE LIABLE FOR DAMAGES, INCLUDING 
ANY LOST PROFITS OR OTHER INCIDENTAL OR 
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR 
INABILITY TO USE THE SOFTWARE, NOTWITHSTANDING 
THAT THE LICENSER HAVE BEEN ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES, THE LICENSER WILL NOT 
BE LIABLE FOR ANY SUCH CLAIM BY ANY OTHER PARTY.

VI.

In the event of any breach by the Licensee of this Agreement, the 

license granted hereby shall immediately terminate and the Licensee 
shall return the software media and all written materials, together with 
any copy of such media or materials, and the Licensee shall keep no 
copies of such items.

VII.

The interpretation of this Agreement shall be governed by the 

following provisions:

A.

This Agreement shall be construed pursuant to and governed by 

the substantive laws of the State of Florida (and any provision of 
Florida law shall not apply if the law of a state or jurisdiction other 
than Florida would otherwise apply).

B.  If any provision of this Agreement is determined by a court of 
competent jurisdiction to be void and non-enforceable, such 
determination shall not affect any other provision of this Agreement, 
and the remaining provisions of this Agreement shall remain in full 
force and effect. If any provision or term of this Agreement is 
susceptible to two or more constructions or interpretations, one or 
more of which would render the provision or term void or non-
enforceable, the parties agree that a construction or interpretation 
which renders the term of provision valid shall be favored.

C.

This Agreement constitutes the entire Agreement, and supersedes 

all prior agreements and understandings, oral and written, among the 
parties to this Agreement with respect to the subject matter hereof.

VIII.

If a party engages the services of an attorney or any other third 

party or in any way initiates legal action to enforce its rights under this 
Agreement, the prevailing party shall be entitled to recover all 
reasonable costs and expenses (including reasonable attorney’s fees 
before trial and in appellate proceedings).

08M47E00_FAROGage.book  Page 2  Wednesday, June 8, 2011  4:12 PM

Содержание Gage









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды