17
Revision date: 05.13.20 112529
OPERATIONAL AND MAINTENANCE INFORMATION
Regular cleaning of the filter is recommended to ensure proper flow. Filter should also be
cleaned after cleaning the reservoir to remove sediment. When a reduced flow rate is noticed,
follow these steps to clean the filter and filter housing.
ATTENTION:
SYSTEM SHOWN MAY
DIFFER FROM ACTUAL SYSTEM. FILTER
ASSEMBLY IS THE SAME. STEPS FOR
CLEANING THE FILTER ARE THE SAME.
1. Turn off the nutrient pump.
2. Grip the filter housing and the main
supply line and unscrew the housing.
Do not apply force to the filter or the
supply line fittings. Hold these steady
when disassembling the filter.
Clean the Filter Screen and Housing
3. Remove the screen from the housing.
Using clean water, rinse the housing
and the screen.
4. Insert the screen back into the housing,
reassemble the filter, and
close the
valve.
5. Turn on the pump and check the flow
from the supply tubes to each bucket.
6. Check filter for leaks.
Flow
