13
Revision date: 05.13.20 112529
Complete these steps:
1. Use the plastic pipe and tube cutter to cut twenty (20) 16" irrigation lines—two (2) for each
bucket.
2. Gently push one 16" line onto each 110407 dripper stake. Wet the line end for easier
assembly. Dripper ends are fragile. Be careful not to bend or break the dripper.
3. Twist two (2) irrigation lines onto each 111044 threaded tee barb.
4. Move to the horizontal supply tube that runs the length of the frame and punch one hole in
the tube at each bucket position. Align hole with the center of each bucket when possible.
5. Carefully grip one barb and irrigation line assembly with a pair of clean pliers and push
it into one of the holes. While still holding the assembly, gently pull back (as if to remove
the barb) to seat the barb in the supply tube.
DO NOT PULL THE BARB OUT OF THE
TUBE!
6. Repeat to install all remaining irrigation line assemblies.
Assembly Instructions
9
PREPARE AND INSTALL IRRIGATION LINES
111044
Threaded Tee
110407
Dripper
Stake
3
2
5
1
4
6
7
8
