12
12
113539
Revision date: 01.13.21
Before assembly, dry fit all pvc connections before applying the
adhesive. Apply adhesive as instructed only.
Use the photos to the right to attach the drain manifold mounting hangers to
the frame using the FA4470 Tek screws and the 100442 driver.
5
Assembly Instructions
ATTACH DRAIN MANIFOLD HANGERS TO FRAME
112539 Hanger
100442 (1)
Nut Setter
FA4470 (10)
Tek Screw
ATTENTION:
Install the drain manifold at the low end of the frame,
which has the shorter (33 1/2") leg pipes.
1"
A. Position bottom of hanger
1" below bottom of tee fitting.
1/2"
B. Position bottom of hanger
1/2" below bottom of tee fitting.
33 1/2"
Legs
36"
Legs
Attach
hangers
here
High End
Drain/Low End
Drain this direction
A
B
Attach Drain Manifold Mounting
Clamps at the low end of the frame.
NOTE:
Reverse clamp position if you want table to drain in the opposite
direction.
