Manual
VIDIUM P 350 | P 450
13
│
24
3.3.PLOUGH ROTATION
For rotation of the
VIDIUM P 350
and
P450
ploughs, both rotary rollers are connected to the double-
acting control devices.
CULTIVATOR ROTATION IN GENERAL
Prior to each rotation it is required to check that there are no people present in the area of rotation and tilting of
the plough. Furthermore, make sure that the bending element is blocked!
*1
The rotating hydraulics is only controlled from the tractor
*2
Do not bend or press the high-pressure hydraulic hoses
*3
Keep the plug-in coupling clean at all times
*4
The bending element must be blocked and the plough must be completely lifted for each rotation
ROTATION BY THE CYLINDER
Prior to rotation, it is required to check that the ball valves (A, B) are turned into the “flow” position (ON).
N =
Neutral:
Rotation complete
D1 =
Rotation:
When the lever is in this position, the plough will rotate in
Direction 1
D2 =
Rotation:
When the lever is in this position, the plough will rotate in
Direction 2
Rotation in Direction 1:
Rotation in direction 2:
Lever from Position N to Position D1
Lever from Position N to Position D2
Interruption of rotation:
Interruption of rotation:
Lever from Position D1 to Position N
Lever from Position D2 to Position N
(Plough frame is fixed)
(Plough frame is fixed)
Resume rotation:
Resume rotation:
Lever from Position N to Position D1
Lever from Position N to Position D2
Returned rotation:
Returned rotation:
Lever from Position N to Position D2
Lever from Position N to Position D1
