Manual
TURBULENT 3 | TURBULENT 5 | TURBULENT 6
17
│
27
You can change the depth setting of the discs during work: if there are uncovered frame grooves behind the
machine, the discs need to be recessed; if there is lengthwise unevenness (waves), the discs need to be lifted.
Adjusting the side extensible discs
It is possible to change the depth of the side extensible discs to ensure good quality of line-up of the
rides.
If there are uncovered channels on the sides of the machine, the extensible discs are set too deep.
Loosen the screws, change the position of the disc as required, tighten the screws.
You can change the position of the extensible disc by 15 or 30 mm.
5.1.6
TURBULENT 5; 6 side frame setting
The support screws secure the setting of the side frames parallel with the middle frame.
If the side frames are not parallel with the middle, set the side frames using the support screws.
87 Nm
Middle frame
Side frame
Side frame
Support screws
Support screws
Support screw
Side frame
Middle frame
Soil
Processing
depth
Max. set depth of disc
processing
Orientation gauge of the depth
setting of the discs
15 mm
30 mm
