Manual
TURBULENT 3 | TURBULENT 5 | TURBULENT 6
13
│
27
Machine Folding
o
Lift the machine on the axle.
o
Using the control unit of the tractor for "FOLDING", continuously fold the side frames.
o
Block or close the control unit.
o
Close the spherical valves of the axle into the closed position (Fig. 3/p.12).
Machine Unfolding
o
Open the spherical valves of the axle into the open position (Fig. 4/p.12).
o
Lift the machine on the axle.
o
Using the tractor's control unit for "UNFOLDING", continuously unfold the side frames.
o
Block or close the control unit.
4.
MACHINE TRANSPORT ON ROADS
Transport Position of
TURBULENT 3
o
Connect the machine by suspending on the tractor using the two-point suspension equipment (TPS
3).
o
Lift the machine on the axle, set the spherical valves of the axle into the closed position (Fig.
3/p.12).
o
Hydraulically set the disc sections to the central position to ensure good clearness of the machine.
o
Insert the side angle discs on the middle frame into the transport position (Fig. 5,6).
o
The machine must be equipped with removable shields with marking of contours, functional
lighting, and the board of the rear marking for slow vehicles (according to ECE No. 69).
o
The lighting must be activated during travelling on roads.
o
The tractor must be equipped with a special light device of an orange colour, which must be
activated during travelling on roads.
o
The maximum transport speed during travelling on roads is
20 kph.
Ban of transport with decreased visibility!
Transport Position of
TURBULENT 5
; 6
o
Connect the machine by suspending on the tractor using the two-point suspension equipment (TPS
3).
o
Connect the machine brakes to the tractor using the brake head – before lifting the machine on the
axle, release the machine brakes.
o
Lift the machine on the axle, set the spherical valves of the axle into the closed position (Fig.
3/p.12).
o
Fold the machine side frames into the transport position.
o
Hydraulically set the disc sections to the central position to ensure good clearness of the machine.
o
Insert the side angle discs on the middle frame into the transport position (Fig. 5,6).
o
The machine must be equipped with removable shields with marking of contours, functional
lighting, and the board of the rear marking for slow vehicles (according to ECE No. 69).
o
The lighting must be activated during travelling on roads.
o
The tractor must be equipped with a special light device of an orange colour, which must be
activated during travelling on roads.
o
The maximum transport speed during travelling on roads is
25 kph.
Ban of transport with decreased visibility!
Fig. 5 – Side angle discs in the working position
Fig. 6 – Side angle discs in the transport position
