Farmet SOFTER 8 8 PS, Руководство по эксплуатации

Страница: 31 / 52

COMMISSIONING
8.3.2 Machine Folding Procedure
Machine Folding Procedure – Transport Position
Initial position: The machine is unfolded and recessed, both ball valves outside are opened.
1
Lift the machine on the rollers (or
rollers and drawbar), i.e. draw out
the piston-rods of rollers (drawbar)
using the yellow circuit into the
marginal position, i. e. maximum
release.
Lift the machine on the axle, i. e.
draw out the piston-rods of the
axle using the green circuits into
the
marginal position, i. e.
maximum release. For SOFTER 11
PS, provide a right deflector for
transport.*
2
Close the ball valve of the circuit of
the central roller – axle (lower)
and fold the machine using the red
circuit.
3
Close the ball valve of the folding
circuit (upper) and draw in the
piston-rods of the side rollers using
the yellow circuit into the marginal
position, i. e. maximum retraction.
Note: As for SOFTER 11 PS, the
piston-rods of the side rollers are
automatically drawn in when the
machine is folded.
Secure the side frames with the
securing drawbar and belt. The
machine is ready for transport.
* Securing the right deflector for transport
31 | 52