Farmet SOFTER 4P, Руководство по эксплуатации

Страница: 30 / 44

MACHINE ADJUSTMENT
10.2 Drawbar for the bottom fixed hitch
• If the machine is equipped with a drawbar for the bottom fixed suspension, it is required to set the
working depth using the spacing washers also on the piston rods of the drawbar as shown below.
1 – Depth adjustment on the drawbar
• When aggregating the machine to the tractor with a bottom hitch at the height of 600 mm (24 in) from
the ground, use the same number of washers on the drawbar piston-rods as on the rear rollers; when the
hitch is lower, the height has to be corrected using additional washers according to tab.2.
1 –
Hitch height h = 600 mm / 24 in
Washers same as on rollers Tab. 2 – Setting the working depth on the drawbar
2 –
Hitch height h = 550 mm / 22 in
Washers same as on r 6 ks
3 –
Hitch height h = 500 mm / 20 in
Washers same as on r12
30 | 44