14
│
25
Manual
KULTIS 6 | KULTIS 8
3.3.4
.
Hydraulic Control System
The hydraulic system allows folding the parts of the frame into the transport position and
controls the tip-protection gear for the transport of the machine and turning at the headland. The
system is designed as dual-circuit with regard to the connection to the pulling vehicle. If the
machine is equipped with hydraulic down pressure, the system has three circuits.
The circuit for folding the arms of the frame consists of two hydraulic cylinders that are
located at the centre of the frame of the machine.
The circuit for the control of the tip-protection gear consists of two hydraulic cylinders and
a hydraulic lock that secures the setting of the position of the travelling wheels.
The distribution of the pressure oil is provided by pressure hoses with a diameter of 6mm
and connecting elements M14x1.5mm.
The pressure vessel is filled with nitrogen to the value of 80bar; no further adjustment is
required.
3.4.
Equipment for the Application of Liquid Fertilizers
The equipment consists of a tank with fittings, a filter, a pump, gearing for the setting of
the application batch, a separator, hose distribution and application pipes.
3.4.1. Fertilizer Tank
The tank is located on the frame. Its capacity is 1,300L. It can be filled up through an
opening at the top or using a hose with a bayonet joint at the bottom. The surface level can be
monitored through the level gauge.
Fig. 1 Fertilizer Tank with Level Gauge
3.4.2. Tanks for Clean Water
The tanks are located on the operating platform of the tank. Their total capacity is 50L.
They can only be filled through the top opening.
