Manual
FANTOM CLASSIC FX 650 PS | FX 850 PS
29
│ 48
3.4.2
MACHINE FOLDING PROCEDURE
Tab. 6
–
Transport position of the machine
Machine Folding Procedure
–
Transport Position
Initial condition: The machine is unfolded and maximally lifted during the headland turn. All closing valves open,
the red circuit switched to frame folding
1
Install all the liners on the piston-rods of the central rollers (TRANSPORT)
Lift the machine up to the maximum
height using the green circuit.
Eject the axle piston rods (yellow circuit)
into the end position, lift the machine up
to the maximum height.
Fold the machine with the red circuit.
Secure the side frames with the red
circuit.
With the green circuit, lower the machine
to the washers and
insert the piston rods of
the side rollers to the end position,
i.e., maximum insertion. Transport height
below 4 m and width below 3 m.
2
Rearrange (close) both levers to the left
(closed for transport, side rollers closed).
