Farmet FANTOM CLASSIC FX 650 PS, Руководство по эксплуатации

Страница: 22 / 48

Manual
FANTOM CLASSIC FX 650 PS | FX 850 PS
22
│ 48
3.1 AGGREGATION TO A TRACTOR
When connecting, no persons may stay in the space between the tractor and the machine.
▪ The machine can be connected only to a tractor, whose curb weight is identical or higher than the overall
weight of the connected machine.
▪
The machine operator must observe all generally valid regulations of work safety, health protection, fire
safety, and environmental protection.
▪ The operator may connect the machine exclusively to a tractor that is equipped with a rear three-point
suspension and a functional undamaged hydraulic system.
Tab. 4 – The table of requirements for the towing means for work with the machine:
Requirement for the tractor engine power for cultivator FX 650 PS 200 - 260 kW
Requirement for the tractor engine power for cultivator FX 850 PS 245 - 370 kW
Requirement for tractor aggregation
Spacing of the lower suspension joints
(measured at the joint axes) 1010±1,5 mm,
(possible to set also 910±1,5 mm)

of the hole of the lower suspension
joints for the machine suspension pivots

37,5 mm
Bottom fixed hitch height 500 – 600 mm (19.7 - 23.6 in)
Bottom fixed hitch aggregation
mechanism
Pin Ø50 mm (1.96 in)
Pin Ø70 mm (2.75 in)
Ball K80
Requirement for the tractor's
hydraulic system
Frame folding circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler sockets
ISO 12.5
Axle lifting circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler sockets
ISO 12.5
Rollers lifting circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler sockets
ISO 12.5
Front tool control circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler sockets
ISO 12.5
Levelling disc circuit
Circuit pressure 200 bar,
2 pcs of quick-coupler sockets
ISO 12.5
▪
Aggregate the machine with the tractor using type and dimensionally consistent components
corresponding to the output requirements. For example, do not aggregate a machine with
ø 50mm pulling
loop to ø 40mm pin!
▪ Connect the machine using the TPS suspension bar to the lower arms of the rear TPS of the tractor, secure
the TPS arms using pins against disconnecting.
▪ The design allows selecting from several versions of aggregation to the tractor.
Aggregation to the rear TBZ hitch Aggregation to the agro tow bar = K80, C40, C50, C70