FARM-MAXX FTL Series, Руководство оператора

Страница: 30 / 35

FTL Series Rotary Tillers
26
 park the tiller on a flat surface, in a place dry and protected from exposition to the elements,
possibly with storage temperature between 0 and 50 ° C (see Section Stopping and
disconnection);

thoroughly clean the machine, removing from the rotor all residues due to tillage, in order to
avoid damage from grass and stagnant water;
 inspect carefully the machine, checking for worn and/or damaged parts. Perform immediately all
repairs and/or replacements needed, in order to make the machine ready for restarting;
 in case of abrasion of painted surfaces, provide restoring the surface protection through touch-up
paint to prevent rust;
 make sure the safety decals are in their original positions, intact and legible. When required,
replace the decals immediately;
 lubricate properly all grease points, and restore the oil levels as indicated in the maintenance
Section. Use protective oil to coat the exposed mechanical components and to protect them
against rust.
If the tiller driveshaft is equipped with a friction clutch, it is suggested to take note of the height of
the compressed springs and loosen the bolts that compress the springs, to prevent the discs from
"sticking" effect due to moisture, that may cause the clutch failure at restart of the activities (see
also Driveshaft maintenance).
Before restart the operations, restore the original height of the springs.
8. SCRAPPING
In case of scrapping, the machine must be disposed in appropriate and authorized sites, according
to local legislation.
Before scrapping, separate plastic parts from rubber parts, aluminum, steel, etc.
Recover and dispose any exhausted oils to authorized centers for oil collecting.
9. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION