background image

FTL Series Rotary Tillers 

 

 

Before engaging the tractor PTO, make sure the tractor PTO speed is set as required for the tiller 

(540 rpm). Do not over speed PTO or machine breakage may result. 

  DANGER 

Do not operate the tiller if the driveshaft is damaged. The driveshaft could be subject to breakage 

during  operation,  causing  serious  injury  or  death.  Remove  the  driveshaft  and  replace  it  with  an 

undamaged. 

 

3.3.

 

OPERATING SAFETY INSTRUCTIONS 

  WARNING 

Before  using  the  machine,  be  sure  to  have  cleared  the  operating  area  from  obstacles  (stones, 

branches, debris, etc...). Mark all the obstacles that cannot be eliminated (e.g. by means flags). 

  DANGER 

Never engage the tractor PTO in the presence of people close to the driveshaft. The body, hair or 

clothing of a person can get caught in rotating parts, causing serious injury or death. 

  DANGER 

Before  engaging  the  PTO  and  during  all  operations,  make  sure  that  no  person  or  animal  is  in 

immediate area of action of the machine. Never use the tiller if people are in his working area. 

  DANGER 

It's absolutely forbidden to stand near the tiller with moving parts. 

  WARNING 

The operator must operate tiller lifting/lowering only from the driving seat of the tractor.  Do not 

perform lifting maneuvers on side or behind the tractor. 

  WARNING 

Before making changes in direction, turns or going in reverse, slightly lift the tiller from the ground 

after disengaging the power take-off, to avoid damage to the machine. 

  DANGER 

In presence of steep slopes (greater than 15 degrees) the tilling action may cause instability of the 

tractor, with risk of tipping and consequent serious injury or death hazard. Consult the manual for 

the tractor to determine the maximum slope that the tractor is able to deal with. 

  DANGER 

Always disengage the PTO before raising the tiller, and never engage the PTO with the tiller in the 

raised position. The machine might throw objects at high speed, causing serious injury or death. 

  WARNING 

Never leave the driver's seat when the tractor is turned on. Before leaving the tractor, lower the 

tiller to the ground, disengage the PTO, insert the parking brake, stop engine and remove the key 

from the control panel. 

  DANGER 

Содержание FTL Series




































Отзывы: