manualshive.com logo in svg

Farm King 482, Руководство оператора и каталог запасных частей

Поделиться
Скачать
Farm King 482 Скачать руководство пользователя страница 99

Warranty - 482 Grain Cleaner

95

Farm King Base Limited Warranty

Farm King provides this warranty only to original retail purchasers of its products. Farm King warrants to 
such purchasers that all Farm King manufactured parts and components used and serviced as provided for 
in the Operator’s Manual shall be free from defects in materials and workmanship for a period following 
delivery to the original retail purchaser of one (1) year. This limited warranty applies only to those parts 
and components manufactured by Farm King. Parts and components manufactured by others are subject 
to their manufacturer’s warranties, if any.

Farm King will fulfill this limited warranty by, at its option, repairing or replacing any covered part that is 
defective or is the result of improper workmanship, provided that the part is returned to Farm King within 
thirty (30) days of the date that such defect or improper workmanship is, or should have been, discovered. 
Parts must be returned through the selling representative and the buyer must prepay transportation 
charges. 

Farm King will not be responsible for repairs or replacements that are necessitated, in whole or part, by 
the use of parts not manufactured by or obtained from Farm King. Under no circumstances are component 
parts warranted against normal wear and tear. There is no warranty on product pump seals, product 
pump bearings, rubber product hoses, pressure gauges, or other components that require replacement 
as part of normal maintenance.

Repair Parts Limited Warranty

Farm King warrants genuine Farm King replacement parts purchased after the expiration of the Farm King 
Limited Warranty, and used and serviced as provided for in the Operator’s Manual, to be free from defects 
in materials or workmanship for a period of thirty (30) days from the invoice date for the parts. Farm King 
will fulfill this limited warranty by, at its option, repairing or replacing any covered part that is defective 
or is the result of improper workmanship, provided that the part is returned to Farm King within thirty 
(30) days of the date that such defect or improper workmanship is, or should have been, discovered. Such 
parts must be shipped to the Farm King factory at the purchaser’s expense.

What Is Not Covered

Under no circumstances does this limited warranty cover any components or parts that have been subject 
to the following: negligence; alteration or modification not approved by Farm King; misuse; improper 
storage; lack of reasonable and proper maintenance, service, or repair; normal wear; damage from failure 
to follow operating instructions; accident; and/or repairs that have been made with parts other than those 
manufactured, supplied, and or authorized by Farm King.

Authorized Dealer And Labor Costs

Repairs eligible for labor under this limited warranty must be made by Farm King or an authorized Farm 
King dealer. Farm King retains the exclusive discretion to determine whether it will pay labor costs for 
warranty repairs or replacements, and the amount of such costs that it will pay and the time in which the 
repairs will be made. If Farm King determines that it will pay labor costs for warranty work, it will do so 
by issuing a credit to the dealer’s or distributor’s account. Farm King will not approve or pay invoices sent 
for repairs that Farm King has not previously approved. Warranty service does not extend the original 
term of this limited warranty.

Содержание 482







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды