Farm King 482 Скачать руководство пользователя страница 25

Страница: 25 / 102

Assembly - 482 Grain Cleaner

Preparing For Assembly

IMPORTANT

Equipment may be shipped without some
components installed due to transport restrictions.

•

Using the packing list, locate and count the individual
components and verify that you have received the
correct number of each component.

•

Check all the components for damage. If any
components are damaged or missing, contact your
Farm King dealer.

WARNING

AVOID INJURY OR DEATH

Before moving the tractor, look in all directions and
make sure no bystanders, especially small children
are in the work area. Do not allow anyone between
the tractor and the equipment when backing up to
the equipment for connecting.

Move the tractor, equipment and components to
an area large enough for assembly.

WARNING

AVOID INJURY OR DEATH

Before you leave the operator’s position:

•

Always park on a flat level surface.

•

Place all controls in NEUTRAL.

•

Engage the park brake.

•

Stop the engine and remove the key.

•

Wait for all moving parts to stop.

Park the tractor / equipment on a flat level surface.

Place all controls in neutral, engage the park brake,
stop the engine and wait for all moving parts to
stop. Leave the operator’s position.

WARNING

AVOID INJURY OR DEATH

Wear safety glasses to prevent eye injury when
any of the following conditions exist:

•

When fluids are under pressure.

•

Flying debris or loose material is present.

•

Engine is running.

•

Tools are being used.

IMPORTANT

The directions front, rear, right, and left are viewed
as the operator sitting in the tractor with the
equipment hitched to the tractor.

Содержание 482







































































































Результаты поиска

Содержание 482

Отзывы:

Бренды по названию

Популярные бренды

Farm King 482, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 482

Отзывы:

Бренды по названию

Популярные бренды