Farm King 482 Скачать руководство пользователя страница 60

Страница: 60 / 102

Operation - 482 Grain Cleaner

Verify that the SMV (Slow Moving Vehicle) emblem,
all lights and reflectors are clean and visible.

The ratio of the tractor / tow vehicle weight to the
loaded equipment weight plays an important role
in defining acceptable travel speed.

TRAVEL SPEED - Acceptable travel speed.

WEIGHT RATIO - Weight of fully equipped or
loaded implement(s) relative to weight of tractor
/ tow vehicle.

Travel Speed

Weight Ratio

20 mph (32 kph)

Less than 1 to 1

10 mph (16 kph)

Less than 2 to 1

DO NOT TOW

More than 2 to 1

Transporting

Always comply with federal, state, local and
provincial laws regarding the transport of farm
equipment on pubic roadways.

WARNING

AVOID INJURY OR DEATH

•

Keep shields and all guards in place

•

Keep bystanders away.

•

Do not allow riders.

•

Always use hazard flashers on the tractor when
transporting unless prohibited by law.

•

Always follow local regulations when transporting on
public roadways. Check with your local authorities.

IMPORTANT

Never exceed 20 mph (32 kph).

WARNING

Use of an unapproved hitch or tractor / tow vehicle
can result in loss of control, leading to serious
injury or death.

Tractor / tow vehicle and hitch must have the rated
capacity to tow equipment.

Tires provided are for low speed towing only. Fill
tires to a maximum of 32 psi (221 kPa).

Verify that the tractor / tow vehicle is approved for
transporting the equipment and that the equipment
is securely attached to the tractor / tow vehicle.

Verify safety chain is installed and properly
connected before transporting equipment.

Содержание 482







































































































Результаты поиска

Содержание 482

Отзывы:

Бренды по названию

Популярные бренды

Farm King 482, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 482

Отзывы:

Бренды по названию

Популярные бренды