manualshive.com logo in svg

Farm King 482, Руководство оператора и каталог запасных частей

Поделиться
Скачать
Farm King 482 Скачать руководство пользователя страница 9

Introduction - 482 Grain Cleaner

5

Owner’s Information

Thank you for your decision to purchase a Farm 
King 482 Grain Cleaner. To ensure maximum 
performance of your equipment, it is mandatory 
that you thoroughly study the Operator and 
Parts Manual and follow the recommendations. 
Proper operation and maintenance are essential 
to maximize equipment life and prevent personal 
injury.

Operate and maintain this equipment in a safe 
manner and in accordance with all applicable local, 
state, and federal codes, regulations and / or laws. 
Follow all on-product labeling and instructions.

Make sure that all personnel have read this 
Operator and Parts Manual and thoroughly 
understand safe and correct operating, installation 
and maintenance procedures.

Farm King is continually working to improve its 
products. Farm King reserves the right to make 
any improvements or changes as deemed practical 
and possible without incurring any responsibility 
or obligation to make any changes or additions to 
equipment sold previously.

Although great care has been taken to ensure the 
accuracy of this publication, Farm King, makes 
no warranty or guarantee of any kind, written or 
expressed, implied or otherwise with regard to the 
information contained within this manual. Farm 
King assumes no responsibility for any errors 
that may appear in this manual and shall not be 
liable under any circumstances for incidental, 
consequential or punitive damages in connection 
with, or arising from the use of this manual.

Keep this manual available for frequent reference. 
All new operators or owners must review the 
manual before using the equipment and annually 
thereafter. 

Contact your Farm King Dealer if you need 
assistance, information, or additional copies of the 
manual. Visit our website at 

www.farm-king.com 

for a complete list of dealers in your area.

The directions front, rear, right, and left are viewed 
as the operator sitting in the tractor with the 
equipment hitched to the tractor.

Serial Number Location

Please enter the model and serial number in the 
space provided for easy reference.

Figure 1

 

Model Number:

Serial Number:

The serial number plate (Item 1) is located on the 
rear frame 

[Figure 1]

.

Always use your serial number when requesting 
information or when ordering parts.

Manual Storage

Figure 2

 

The operator and parts manual and other 
documents can be stored in the canister (Item 1) 

[Figure 2]

.

1

1

Содержание 482







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды