manualshive.com logo in svg

Farm King 482, Руководство оператора и каталог запасных частей

Поделиться
Скачать
Farm King 482 Скачать руководство пользователя страница 32

Assembly - 482 Grain Cleaner

28

Trash Pan

Attach the two trash pan end brackets (Item 1, 2) 
and trash pan side (Item 3, 4) to the trough (Item 5) 
using 1/4” x 3/4” hex bolts, 5/16” flat washers, and 
1/4” lock nuts 

[Figure 8]

.

The stub shaft of the trough flighting must face 
front.

Slide the trash pan assembly underneath the 
frame. Rest trash pan on frame edges.

Position left and right trash pan side panels (Item 
6, 7) on the frame edges. Align holes along bottom 
of side panels with trash pan holes. Attach side 
panels and trash pan to frame using 1/4” x 3/4” 
self-tapping screws 

[Figure 8]

.

Attach top corners of side panels to frame mounts 
using 1/4” x 3/4” hex bolts, 5/16” flat washers, and 
1/4” lock nuts.

Slide one 6” single pulley (Item 8) onto the trough 
flighting stub shaft. Attach pulley using one key 
and two Ø5/16” x 1/4” socket set screws 

[Figure 8]

.

Slide one 3” single pulley (Item 9) onto the end of 
the reducer shaft. Attach pulley using one key and 
two Ø3/8” x 1/2” socket set screws 

[Figure 8]

.

Attach one 3” idler pulley (Item 10) to the slotted 
bracket welded to the front frame using one 5/8” 
x 3” hex bolt, 5/8” flat washers, and 5/8” lock nut 

[Figure 8]

.

NOTE: 

Use 5/8” flat washers as required on both 
sides of idler pulley to align with belt 

 

assembly.

Содержание 482







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды