Farm King 2400 Скачать руководство пользователя страница 59

Страница: 59 / 112

Maintenance - Round Bale Carrier 2400

CLEANING THE BALE CARRIER

Fully Clean the Bale Carrier EVERY 50 HOURS:

Keep the bale carrier free of any hay or straw build up,
especially keep all electrical and hydraulic components
clear.

CARRIER BEAMS

Resurfacing

Apply EZ-Slide (graphite-based coating to reduce sliding
friction) to the carrier regularly, especially when handling
heavier bales.

NOTE: At the end of the season a coating may be

applied to prevent rust on the carrier beams.

SAFETY SIGN (DECAL) INSTALLATION

Procedure

•

Remove all portions of the damaged safety sign
(decal).

•

Thoroughly clean the area with glass cleaner.
Remove all adhesive residue.

•

Allow the area to dry completely before installing the
new safety sign (decal).

•

Position the safety sign (decal) in the correct location.
Remove a small portion of the backing paper on the
safety sign (decal).

•

Press on the safety sign (decal) where the backing
paper has been removed.

•

Slowly remove the remaining backing paper, pressing
on the safety sign (decal) as the backing paper is
removed.

•

Using the backing paper, pressing firmly, move the
backing paper over the entire safety sign (decal) area.

NOTE: Small air pockets can be pierced with a pin

and smoothed out using the piece of the
backing paper.

Follow application instructions as provided by the
coating manufacturer.

When replacing safety signs (decals), the
temperature must be above 10° C (50° F).

Содержание 2400

















































































































Результаты поиска

Содержание 2400

Отзывы:

Farm King 2400, Руководство оператора и каталог запасных частей, Страница: 59 / 112

Результаты поиска

Содержание 2400

Отзывы: