Farm King 2400, Руководство оператора и каталог запасных частей, Страница: 35 / 112

Operation - Round Bale Carrier 2400
35
GENERAL INFORMATION
Pre - Operation Checklist
Before operating the Bale Carrier for the first time and
each time thereafter, check the following items:
1. Lubricate the equipment per the schedule outline in
the Maintenance Section. (See “SERVICE
SCHEDULE” on page 52.)
2. Check the Bale Carrier hitch for damaged, loose or
missing parts. Repair as needed before operation.
3. Check that tire pressure is 90 psi (620 kpa).
4.
Check that wheel bolt torque is
110
ft. lb. (
149
Nm).
5.
Fully clean the equipment. (See “CLEANING THE
BALE CARRIER” on page 59.)
6.
Check chain tension and adjust if necessary. (See
“Adjusting Chain Tension” on page 56.)
7.
Check carrier beams and add graphite coating if
necessary. (See “Resurfacing” on page 59.)
8.
Inspect all electrical connections to ensure proper
function of the machine.
9.
Inspect all safety reflective decals, slow moving
vehicle decals and lights where applicable.
10. Check condition of all hydraulic components for leaks.
Repair as required.
NOTE: Do not operate with hydraulic leaks.
11. Verify that the lift arm transport lock has been
removed and securely stored.
12. Verify that the bale carrier is properly connected to the
tractor with the safety chain.
MOVING PART HAZARD
To prevent serious injury or death from moving
parts:
• Close and secure guards and shields before
starting.
• Keep hands, feet, hair and clothing away from
moving parts.
• Disconnect and lockout power source before
adjusting or servicing.
• Do not stand or climb on machine when
operating.
AVOID INJURY OR DEATH
Wear safety glasses to prevent eye injury when any
of the following conditions exist:
• When fluids are under pressure.
• Flying debris or loose material is present.
• Engine is running.
• Tools are being used.
Leaking fluids under pressure can enter the skin
and cause serious injury or death. Immediate
medical attention is required. Wear goggles. Use
cardboard to check for leaks.