Farm King 2400 Скачать руководство пользователя страница 41

Страница: 41 / 112

Operation - Round Bale Carrier 2400

Connecting Hydraulic Lines

NOTE: Make sure the quick couplers are fully

engaged. If the quick couplers do not fully
engage, check to see that the couplers are the
same size and type.

To Connect:

Figure 32

Connect the two hydraulic lines to the tractor

[Figure 32]

Supply Line (Red dust cap) “P” port of valve bank.

Return Line (Black dust cap) “T” port of valve bank.

To Disconnect:

Pull on the hydraulic lines to disconnect.

HIGH PRESSURE FLUID HAZARD

To prevent serious injury or death from high
pressure fluid:

•

Relieve pressure on system before repairing or
adjusting.

•

Wear proper hand and eye protection when
searching for leaks. Use wood or cardboard
instead of hands.

•

Keep all components in good repair.

•

Contain and dispose of any oil leakage in an
environmentally safe manner.

•

Thoroughly clean the quick couplers before
making connections. Dirt can quickly damage
the system.

B-10052

AVOID BURNS

Hydraulic fluid, tubes, fittings and quick couplers
can get hot when running equipment. Be careful
when connecting and disconnecting quick couplers.

Содержание 2400

















































































































Результаты поиска

Содержание 2400

Отзывы:

Farm King 2400, Руководство оператора и каталог запасных частей, Страница: 41 / 112

Результаты поиска

Содержание 2400

Отзывы: