Farm King 2400 Скачать руководство пользователя страница 29

Страница: 29 / 112

Assembly - Round Bale Carrier 2400

Figure 14

Align the rod end of the pick up lift cylinder (Item 1) with
the lower rear pick up arm mount (Item 2)

[Figure 14]

NOTE: When installing the 1-1/4 x 6-3/4 inch lift arm

pivot pin, maintain hole alignment of the pin
and collar on the pick up arm mount.

Install one 1-1/4 x 6-3/4 inch pin (Item 3)

[Figure 14]

through the pick up arm mount and lift cylinder (front to
rear, with hole in pin towards the rear).

Install one 3/8” x 2-1/2” bolt (Item 4)

[Figure 14]

through

the collar and pin. Install one 3/8” locknut on the bolt and
tighten.

Figure 15

Align the front mounting bracket (Item 1) of the pick up
arm with the hole in the rear pick up arm mount (Item 2)

[Figure 15]

on the carrier frame.

NOTE: When installing the 1-1/4 x 6-3/4 inch lift arm

pivot pin, maintain hole alignment of the pin
and collar on the pick up arm mounting
bracket.

Install one 1-1/4 x 6-3/4 inch lift arm pivot pin (Item 3)

[Figure 15]

through the pick up arm mounting bracket

and carrier mount (front to rear, with hole in pin towards
the front).

Figure 16

Install one 3/8” x 2-1/2” bolt (Item 1)

[Figure 16]

through

the collar and pin. Install one 3/8” locknut on the bolt and
tighten.

Figure 17

Locate RH fork with deflector (Item 1). Install straps (Item
2)

[Figure 17]

around the RH fork with deflector (keeping

the RH fork with deflector as level as possible).

B-10035

B-10036

B-10037

B-10040

Содержание 2400

















































































































Результаты поиска

Содержание 2400

Отзывы:

Farm King 2400, Руководство оператора и каталог запасных частей, Страница: 29 / 112

Результаты поиска

Содержание 2400

Отзывы: