Farm King 2400 Скачать руководство пользователя страница 30

Страница: 30 / 112

Assembly - Round Bale Carrier 2400

Raise the pick up arm high enough to allow the RH fork
with deflector to be placed under the pick up arm.

Figure 18

Move the RH fork with deflector (Item 1) in position under
the outside of the pick up arm (Item 2)

[Figure 18]

Figure 19

Raise the RH fork with deflector (Item 1) up against the
pick up arm (Item 2)

[Figure 19]

Install two 5/8” x 6” bolts (Item 3)

[Figure 19]

through the

RH fork with deflector mounting bracket (over the pick up
arm)

NOTE: Locate the RH fork with deflector

approximately 1-1/2” in from the outer end of
the pick up arm.

Install one 5/8” flat washer and 5/8” nut (Item 4)

[Figure

19]

on the each bolt and tighten.

Figure 20

Locate inside fork arm (Item 1). Install straps (Item 2)

[Figure 20]

around the inside fork arm (keeping the

inside fork arm as level as possible).

Figure 21

Move the inside fork arm (Item 1) in position under the
pick up arm (Item 2)

[Figure 21]

(towards the inside

corner).

B-10058

B-10059

B-10060

B-10061

Содержание 2400

















































































































Результаты поиска

Содержание 2400

Отзывы:

Farm King 2400, Руководство оператора и каталог запасных частей, Страница: 30 / 112

Результаты поиска

Содержание 2400

Отзывы: