RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona
C11 Card Printer and Persona
M11 Card Printer User Guide (Rev. 5.0)
139
Selecting the Defined Area(s) function
To define an area, refer to the following steps:
Step
Procedure
1
Click on the Defined Area(s) check box. (Note: This will activate the card grid
in the upper half of the window. It is through this card grid that up to five areas
can be defined.)
When the card grid is first activated, a small square will appear at its default size
of .2" x .2"/5mm x 5mm and at its default location in the lower left-hand corner
(0,0). This square represents the first defined area.
(Note: Changing the orientation of the card in the Card Tab will change the
appearance of this Tab.)
Continued on the next page
