RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona
C11 Card Printer and Persona
M11 Card Printer User Guide (Rev. 5.0)
153
Selecting the Pause for Low Ribbon option
Use this option as a definitive warning when running low on print ribbon. (Note: Select this
option so the Printer will beep and pause and the Media LED will flash when approximately
10 to 20 prints remain on the print ribbon.)
Step
Description
1
Replace the ribbon and press the Media button
to continue printing with a
new ribbon
OR
Leave the existing ribbon in Printer and press the Media button
.
When this option is selected, once the Media button is pressed, the Printer
will continue printing until the end of the ribbon and will beep once before
each print job. (Note: It will not be necessary to press the Media button
again to continue printing once it has been pressed initially during a batch
print.)
When this option is not selected, the Printer will still beep once before each
print job when approximately 10 to 20 prints remain on the print ribbon,
however, the Printer will not pause. (Note: Instead, it will continue printing
until the end of the ribbon, without user intervention.)
