Faraone ELEVAH 70, Инструкция по эксплуатации и обслуживанию

Страница: 31 / 62

USE AND MAINTENANCE MANUAL - SECTION 4
AERIAL PLATFORM ELEVAH 70 - Rev. 04_2020 Page 4-11
TRANSPORT AND LIFTING PROCEDURES
General information
It is possible to transport the machine on to work premises using one of the following methods:
By driving the machine along the route on its base wheels, if the surface it is travelling on allows
it
By moving it with a forklift (check the gross weight of the machine in the Operational Technical
Data Table for the machine)
ATTENTION
LOAD THE MACHINE ONTO A HEAVY DUTY VEHICLE HAVING A USEFUL LOAD CAPACITY
ABLE TO SUPPORT THE TOTAL WEIGHT OF THE MACHINE (CHECK THE GROSS WEIGHT
OF THE MACHINE IN THE OPERATIONAL TECHNICAL DATA TABLE OF THE MACHINE)
ATTENTION
FASTEN THE MACHINE SO THAT IT WILL NOT GET DAMAGED DURING TRANSPORT.
Handling with a forklift truck
The machine can be lifted with a forklift truck. In this case, it must be held from the rear part of the
machine in order to position it in a stable way onto the forks (see following figure).
ATTENTION
LIFT THE MACHINE ONLY WITH WORK PLATFORM FULLY LOWERED.