Fantic Motor TZ 125 2011, Руководство пользователя

Страница: 38 / 72

38
Exhaust: Cover it with a plastic bag tightened with rubber bands.
Clutch and brake levers, hand grips, and engine stop button: Cover these
parts with plastic bags.
Air cleaner intake:
Cover the opening with tape or with a rag.
2- Where to be careful
Avoid spraying water with any great force near the following areas:
- Brake calipers and brake pump piston.
- Ignition coil or into the spark plug cap.
- Front and rear wheel hubs.
- Steering bearings.
- Rear suspension system.
- Swingarm bearings.
WARNING
To avoid excessive ageing of the plastic parts and other washable pieces
of the motorcycle, it is suggested that these items must be washed care-
fully. If the washer applies water at high pressure and/or temperature, take
the precaution of maintaining the washer outlet gun at a distance of 30
centimeters minimum, this will ensure the correct gloss of the plastics and
maintain adherence of the self-adhesive labels that decorate the motor-
cycle.
3- After washing
- Remove the plastic bags, and clean the air cleaner intake.
- Lubricate the points listed in the lubrication section (see pag. 41).
- Start the engine and let it run for 5 minutes.
- Check the brakes before operating the motorcycle.
WARNING
Never wax or lubricate the brake disc. Loss of braking and an accident
could result. Clean the disc with trichloroethylene or acetone.