Fantic Motor TZ 125 2011, Руководство пользователя

Страница: 28 / 72

28
Tighten the bolts, front fi rst and then the rear, to 25 Nm of torque.
If the handlebar is installed correctly, there will be an even gap at the front
and rear after tightening (A).
BRAKES
Disc and disc pad wear is automatically compensated for and has no e ff ect on
the brake lever or pedal action. So there are no parts that require adjustment
on the brakes except brake lever free play and brake pedal position.
Front brake lever free play
Adjust the front brake lever (A) to match your requirements. To adjust, loosen
the nut (B). After adjustment, tighten it securely. Then check that the brake
response is correct.
(B)
(A)
Rear brake pedal position
When the brake pedal is in rest position, there should be a free play of 10 mm.
Check the brake for good braking power and no brake drag.
(A)
(B)
(A) - Brake pedal.
(B) - 10 mm free play.
WARNING
If the brake pedal feels spongy when it is applied, there might be air
trapped in the brake pump or the brake may be defective. Since it is dan-
gerous to operate the motorcycle under such conditions, have the brake
checked inmediately.