Fantic Motor TZ 125 2011, Руководство пользователя

Страница: 29 / 72

29
Brake fl uid
Inspect the brake fl uid level and change it periodically. The brake fl uid should
also be changed if it becomes contaminated with dirt or water.
Liquid recommended
: Use D.O.T 3 o D.O.T 4.
(see table lubricants pag. 70)
Brake fl uid level inspection
The front (A) and rear (B) reservoirs must be kept more than half full with
brake fl uid. If the brake fl uid is insu ffi cient, add brake fl uid.
(B)
CAUTION
Do not spill brake fl uid onto any painted surface. Do not use fl uid from a
container that has been left open or that has been unsealed for a long time.
Check for fl uid leakage around the fi ttings. Check for brake hose damage.
WARNING
Do not mix di ff erent types of fl uid. Change the brake fl uid in the reservoirs
completely if the same type of brake fl uid is not available.
Brake wear inspection
If the thickness of either pad, front and rear, is less than 1 mm, replace both
pads as a set. Pad replacement should be carried out only by an authorized
FANTIC MOTOR dealer.
STEERING
The steering should always be kept adjusted so that the handlebar will turn
freely but without free play.