Fantic Motor Caballero 50, Руководство пользователя

Страница: 77 / 168

77
ENG
LISH
IDENTIFICATION DATA
It is a good rule to write the vehicle identification
number (VIN) and that of the engine in the relative
space provided in this handbook.
These numbers may be used when purchasing
spare parts.
Changing identification numbers can
lead to the application of severe pen-
alties and administrative fines; in
particular changing the VIN leads to
immediate invalidity of the warranty.
VEHICLE IDENTIFICATION NUMBER (VIN)
Every FANTIC MOTOR vehicle has a VIN to be
found on the steering head tube.
�����������������
ENGINE IDENTIFICATION NUMBER
Every FANTIC MOTOR vehicle also has an engine
identification number to be found on the crank-
case cover on the upper left side.
�����������������
ENGINE OIL
PAY ATTENTION TO THE FOLLOWING!
The gear oil is:
- harmful by inhalation, if swallowed or in
contact with skin, with possible serious con-
sequences;
- irritating to skin;
- harmful for the environment.
To be avoided:
- contact with skin;
- inhalation of vapours;
- ingestion;
- release to the environment;
- exposure to air.
If swallowed do NOT induce vomiting but seek
medical advice immediately (first aid post),
indicating the cause and how the accident oc-
curred.
After contact with skin, wash the affected part
immediately with soap and water, repeating the
operation until there are no more residues.
In case of contact with eyes or ears, rinse the
affected parts immediately with plenty of water
and seek medical advice immediately (first aid
post), indicating the cause and how the accident
occurred.
After contact with clothes, remove contaminated
articles and wash immediately with plenty of
water and soap. Substitute the contaminated
clothes, which must be cleaned appropriately as
soon as possible.
If gear oil is accidentally spilt on the floor or in
other areas, clean the contaminated area.
Always wear latex gloves to protect hands when
carrying out maintenance.
Always close the gear oil cap properly after every
topping up.
KEEP OUT OF REACH OF CHILDREN.
DISPOSE OF THE OIL AT A SPECIAL WASTE
COLLECTION POINT.
The used gear oil must be put in a sealed con-
tainer and taken to the nearest service station or
to a waste oil collection point where it will be
disposed of correctly.
CHECKING THE GEAR OIL LEVEL
The vehicle must be placed on firm and level
ground so that measurements are correct.
The level must be controlled with the engine
cold. If the vehicle has just been used, it is advis-
able to wait at least ten minutes for the engine
to cool so that the oil circulating in the crankcase
settles and cools.
It is advisable to wear a pair of gloves for this
operation.
Place the motorcycle upright with both wheels
resting on the ground.
NOTE: do not check the oil level with the motor-
cycle resting on its stand.
Remove the control screw (1) located in the
right-hand part of the crankcase; the oil level is
correct when it does not exceed the bottom lip
of the hole.