FANTEM Oomi MultiSensor, Руководство пользователя

Страница: 12 / 35

Your MultiSensor has built in battery level detection. It will automatically
report its battery level to the associated controller/gateway throughout
its life until the battery is fully drained and needs replacing. The battery
status will often be displayed in the user interface of the controller/
gateway.
When used properly in an optimised Z-Wave network, your MultiSensor
can be powered by batteries for 24 months before battery replacement
is necessary.
Recommendation: For networks which do not offer a method to
display the battery level of your MultiSensor, it is recommended that
the sensor be tested occasionally to ensure that the batteries still hold
enough charge to operate. Batteries naturally lose their charge over
time.
Please note that when installed outdoors of your home, your
MultiSensor should only be relied on for temperature, light, humidity,
and ultraviolet readings, where as the motion sensing capabilities should
be disabled on your gateway in order to avoid false readings.
If selecting an outdoor location, it’s important to position your
MultiSensor in a sheltered location. It is best if your MultiSensor is not
directly exposed to rain, and is important that the humidity venting on
your MultiSensor never is.
Outdoor installation.
11
4
Changing batteries.
Advanced functions.