background image

IN NO EVENT SHALL AEON LABS BE LIABLE FOR ANY INDIRECT, 
INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL 
DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, OR 
USE INCURRED BY CUSTOMER OR ANY THIRD PARTY, WHETHER 
IN AN ACTION IN CONTRACT, OR TORT, OR OTHERWISE EVEN 

21

returned Products, and insure the shipment or accept the risk of loss 

or damage during such shipment and transportation. Aeon Labs 

will ship the repaired or replacement products to Customer freight 

prepaid.
Customer shall indemnify, defend, and hold Aeon Labs and 

Aeon Labs' affiliates, shareholders, directors, officers, employees, 

contractors, agents and other representatives harmless from all 

demands, claims, actions, causes of action, proceedings, suits, 

assessments, losses, damages, liabilities, settlements, judgments, 

fines, penalties, interest, costs and expenses (including fees and 

disbursements of counsel) of every kind (i) based upon personal 

injury or death or injury to property to the extent any of the 

foregoing is proximately caused either by a defective product 

(including strict liability in tort) or by the negligent or willful acts or 

omissions of Customer or its officers, employees, subcontractors or 

agents, and/or (ii) arising from or relating to any actual or alleged 

infringement or misappropriation of any patent, trademark, mask 

work, copyright, trade secret or any actual or alleged violation of 

any other intellectual property rights arising from or in connection 

with the products, except to the extent that such infringement exists 

as a result of Aeon Labs' manufacturing processes.  

Содержание Oomi MultiSensor




































Отзывы: