EN_FANOXTD_GUIDE_SIL_OCEFPrimaryDist_SILA_R002.doc 9 / 36
2.3.
How to install SICOM software
To install the SICom it is necessary the following link:
http://fanox.blob.core.windows.net/sicom/publish.htm
The link will open the next screen, where button
“install” must be pressed:
The necessary drivers depending on the operative system can be downloaded from this page.
The update of the software does not require any user´s action, this is, if the computer is
connected to Internet, SICom updates itself when it is started.
2.4.
Setting-up the session: Password and access levels
Users must identify themselves with a password to start communications and to change the
equipment settings or configuration using the HMI. Depending on the access level, it may or
may not be possible to perform the operations shown on the table below.
ACCESS
LEVEL
Read-only
permission:
Status and
measurements
Settings
Configuration
Events/DFR
Permission to:
Change settings
Permission to:
Delete Events
Delete DFR
Permission to:
Execute
Commands
Set Counters
Permission to:
Change
Configuration
Permission to
Change
Protected
Settings
2
YES
YES
YES
NO
NO
NO
3
YES
NO
NO
YES
NO
NO
4
YES
YES
YES
YES
NO
NO
5
YES
YES
YES
YES
YES
NO
Four passwords and their associated levels of access are set up when the equipment is
configured using the SIcom program. By default, the equipment is programmed with the
following passwords and their associated levels:
PASSWORD
ACCESS LEVEL
2222
2
3333
3
4444
4
5555
5