EN_FANOXTD_GUIDE_SIL_OCEFPrimaryDist_SILA_R002.doc 27 / 36
7.3.4. Events menu
How to delete the events
7.3.5. Counters
How to set a counter
From the standby mode scree
n, press the “OK” key to
acc
ess the first line of menus. Use the “▲” and “▼” keys
to position the cursor over the “EVENTS” screen and the
number of events in the buffer will be displayed. Press
"OK" and use the “▲” and “▼” keys to position the
cursor over the events.
The “┘” and “┐” shows the event has been caused by
the activation or reset.
Each event contains the following information:
Date-time; Description of the event
Size of the events buffer; Position of the event
within the list
Caused by activation or reset; Associated
measurement
To delete the events from the relay it is necessary to
insert the password 5555 from the events menu.
After the erasing of the events it will be
appear there is 1
event corresponding to “Events erased
”
NOTE
: When the events are deleted, the fault reports
persist in the relay to analyze the fault situation until
these fault reports are deleted consciously by the user.
From the standby mode scree
n, press the “OK” key to
acc
ess the first line of menus. Use the “▲” and “▼” keys
to position the curs
or over the “COUNTERS” screen.
Press "OK" and
use the “▲” and “▼” keys to position the
cursor over the counters.
Counters give us the following information:
Openings Number
Acumulated Amps
Reclosings Number
To set a counter from the relay it is necessary to insert
the password 5555 from the specific counter menu.