8
Motor
Assembly
5.
Slide the blade through the slot in the motor
assembly and attach to the motor hub using the
3/16˝-24 serrated head screws and flat washers.
Tighten serrated head screws with flat washers to
secure the blade to the hub of motor assembly.
(Figure 5)
NOTE:
Make sure the bottom edge of the blade is fully
seated against the flywheel of motor assembly.
3/16
”
-24
Serrated Head Screws
and Flat Washers
(3 each per blade)
Blade
HARDWARE USED:
x 15
x 15
3/16
”
-24
Serrated Head Screws
Flat Washers
Figure 5
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
6.
Re-assemble the upper housing cover and motor
coupler washer as shown. (Figure 6)
Motor Coupler
Washer
Upper Housing
Cover
Motor
Assembly
Figure 6
7.
Securely tighten the six screws that were previously
removed in Step 3 on the motor assembly. (Figure 7)
Motor
Assembly
Figure 7
How to Assemble Your Ceiling Fan Blades (Continued)
