Fanelite FANDC52, Руководство пользователя

Страница: 30 / 32

28
not touch it, leave the power off, and call a qualified electrician.
3. The remote control and the receiver are maybe unpaired. Refer to the USE OF THE REMOTE CONTROL
section to perform the pairing procedure again.
4. If your receiver beeps several times when you press a button on the remote control, this is an error code
and this means that your receiver has locked out. To reset it, turn off the power of your ceiling fan by using
the circuit breaker or switch, wait 1 minute and then turn on the power again.
5. Check your electrical connections. Refer to the ELECTRICAL CONNECTIONS section. Check that all met -
al wires and pins are securely engaged in their connectors. It sometimes happens that one of the wires and
and one of the metal pins is slightly recessed in the connector and prevents the operation of the ceiling fan.
Push on the wires if necessary to fully engage them in the connectors. Check that current is coming through
your ceiling AC power supply. Check that no electrical wires are damaged.
The ceiling fan oscillates abnormally during operation :
A ceiling fan vibrates naturally when it is working. Even a well-balanced ceiling fan causes vibration when it
works.
1. Check the condition of the screws of the blades and tighten them if necessary.
2. Check that the hanger ball is securely locked in the hanger bracket (concave groove of hanger ball into the
lugs of hanger bracket).
3. If your ceiling fan still oscillates abnormally when it is working, it may be because the blades are not well
balanced. In this case, use the balancing kit supplied with your ceiling fan to re-balance them. To identify the
defective blade, turn off your ceiling fan, put the plastic pliers on the edge of a blade and turn on your ceiling
fan. Repeat by changing position and blade if necessary until normal operation of the ceiling fan is resumed.
Once the correct position is found, glue the weight at the level of the pliers (onto the blade) then remove the
pliers.
For more information, visit our website www.fanelite.com or contact us. See ADDITIONAL INFORMA-
TION section.
17. TECHNICAL SPECIFICATIONS
Reference : FANDC52
Power source : 220-240 V~ 50/60 Hz
Protection class : II
Package dimensions : 65 x 37,8 x 25 cm
Gross weight : 5,35 kg
Net weight : 4,05 kg
Power : 31 Watts
Diameter : 132 cm
18. ENVIRONMENT PROTECTION
Do not dispose of this product in the usual household garbage at the end of its life cycle ; hand it over a collec -
tion point for the recycling of electrical and electronic appliances. The symbol on the product, the instructions
Instructions on environment protection