Fanelite FANDC52, Руководство пользователя

Страница: 23 / 32

21
WARNING : The fixing must be done securely in the structure of the ceiling by a qualified person.
Depending on the structure of your ceiling, use suitable screws and washers. Do not fix the ceiling
support in a structure thinner than 50 mm or in hollow elements, in order to avoid any risk of falling.
Make sure that the fixing is very solid and can support at least 68 kg by pulling it. We decline all re-
sponsibility in the event of a fall of the ceiling fan.
You can install the hanger bracket on an inclined ceiling of 15° maximum. If your ceiling is inclined, the lugs of
the hanger bracket must be on the highest side of your ceiling. Do not put it on the lowest side of your ceiling.
WOOD CEILING
Position the support in the desired location and fix it using the screws provided.
CONCRETE CEILING
Position the support in the desired location and mark the holes to be made. Remove the support and drill the
concrete structure by making 2 holes corresponding to the diameter of your anchor studs. Remove dust and
introduce the anchor studs using a hammer (leave the threaded rod sticking out). Remove nuts and washers,
replace the support and replace the washers and nuts. Tighten the nuts securely using a suitable wrench.
7. FIX THE CEILING HANGER BRACKET