26
Power On / Off
Speed setting
Timer setting
Mode setting
Summer / Winter mode
3/ PAIRING PROCEDURE REMOTE CONTROL / RECEIVER
By default, the remote control and the receiver are already paired together. If the remote control is not con
-
nected to the receiver, please follow the steps below :
1/ Turn off the power of your ceiling fan using the circuit breaker or switch.
Press this button to turn on or off your ceiling fan. Your ceiling fan starts by default at speed 3.
2/ USE OF THE REMOTE CONTROL
Press this button to increase the speed (5 speeds, speed 1 is the lowest, speed 5 is the highest). The
number of bars visible on the screen correspond to the selected speed.
Press this button to decrease the speed (5 speeds, speed 1 is the lowest, speed 5 is the highest). The
number of bars visible on the screen correspond to the selected speed.
Press this button to set the timer (automatic stop after the selected time has been reached). Each time
this button is pressed, the timer increases by one hour (12 hours max). The selected time is displayed
on the screen. To deactivate the timer, press until the screen of the remote control shows no more time
or manually turn off the ceiling fan.
TIMER
MODE
Press this button to change the ventilation modes. By default, the ceiling fan starts in normal mode.
NORMAL : The ceiling fan operates normally depending of the speed selected. No indicator is displayed
on the screen.
SLEEP : The ceiling fan automatically decreases its speed by one level every 30 minutes. Select the
starting speed before activating SLEEP mode. The MODE SLEEP indicator is displayed on the screen
when this mode is activated.
ECO: The ceiling fan operates in eco mode at a high energy efficiency level, between speed 1 and 2. The
ECO MODE indicator is displayed on the screen when this mode is activated.
Note: When the ECO or SLEEP modes are activated, the speed buttons do not work.
Press this button to change the running direction of the blades. By default your ceiling fan rotates coun
-
terclockwise (summer mode). This mode allows the room to be refreshed by sending the cold air down
and hot air at the top. The winter mode, meanwhile, will allow you to heat the room by sending hot air
down (the blades turn in the opposite direction, clockwise).
F forward = S = Summer = counterclockwise rotation
R reverse = W = Winter = clockwise rotation
F / R
Содержание FANDC52
Страница 32: ...www fanelite com fanelitebrand...