F&S Bondtec 56 i Series Скачать руководство пользователя страница 10

Страница: 10 / 57

For your Safety

Permitted materials.

Depending on the type of machine, the machine is designed only for materials specified in the purchase contract.

Any other or further use is considered improper use. F&S BONDTEC assumes no liability for damage resulting from
improper use of the machine or individual components.

Intended use also includes:

The observance of all instructions in the user manual.

The observation of all references of other components.

The timely execution of all inspection and maintenance work.

2.5

Obvious misuse

The manufacturer is not aware of any misuse.

2.6

Residual hazards

Drives / Power Unit.

Long, loose hair can be wrapped with removed covers. Risk of injury!

Hazardous Substances.

The machine contains no hazardous substances. However, hazardous substances can be used in cleaning (e.g., ace-
tone).

When handling cleaning agents, observe the corresponding safety regulations of the manufacturer!

Heated substrate shots.

For bonding with gold wire a temperature > 100 ° C is necessary. The substrate is heated via the substrate holder.

2.7

Protective Equipment / Personal Protective Equipment

Before starting the machine, all guards must be properly installed and functioning.

Protective devices may only be removed:

after standstill and

after protection against re-starting the machine

When sub-components are supplied, the guards must be installed by the operator in accordance with regulations.

Personal protective equipment is not necessary for working with the machine.

Do not reach into uncovered areas of electronics when the machine is running. Danger of
electric shock!

Only operate the machine when all covers are closed. Do not remove covers when the
machine is in operation. Risk of injury!

Содержание 56 i Series
























































Результаты поиска

Содержание 56 i Series

Отзывы:

F&S Bondtec 56 i Series, Руководство пользователя, Страница: 10 / 57

Результаты поиска

Содержание 56 i Series

Отзывы: